The optional device drivers listed below will only install on ION Enterprise 5.6 SP2 and 6.0. Earlier versions of ION Enterprise are not supported.
The optional device drivers available for installation into ION Enterprise 5.6 SP2 and 6.0 are as follows:
|
Device
|
Driver Revision
|
| Altistart 48 |
V1.1.3 |
| Branch Circuit Monitor (BCM42) |
V1.1.3 |
| Branch Circuit Monitor (BCM42_100A) 100 Ampere Version |
V1.1.3 |
| Circuit Monitor Series 100/200 LE |
V1.1.3 |
| Circuit Monitor Series 2000 LE |
V1.0.2 |
| Circuit Monitor Series 2000 SE |
V6.0.1.223 |
| EM4800-08 LE |
V1.2.0 |
| EM4800-12 LE |
V1.2.0 |
| EM4800-24 LE |
V1.2.0 |
| Enercept Meter |
V1.1.1 |
| Energy Meter |
V1.1.1 |
| Multi-circuit Meter (MCM) |
V1.1.1 |
| Power Meter 9C |
V1.1.1 |
| Power Meter 500 |
V1.1.1 |
| Power Meter 600 Series LE |
V1.0.2 |
| Sepam Series 20 LE |
V1.0.2 |
| Sepam Series 40 LE |
V1.0.2 |
| Sepam Series 80 LE |
V1.0.2 |
| TeSysT |
V1.1.0 |
| Vigilohm - Coming Soon |
|
LE = Light Edition. These optional device drivers contain a subset of the full Modbus register list available for each device type.
- Only real-time reads from the device will be supported.
- As part of the optional device download and installation, standard ION Vista diagram displays and predefined software-based data logging will be provided.
- Software-based alarming will be available through the VIP module of ION Enterprise, and will require manual configuration.
- No onboard device data logs, onboard alarm logs, onboard waveform captures (if available on the device), or device control (i.e. resets) are supported by optional devices.
There is also an Optional Device Driver Compatible Energy and Demand Report available for download.
