|
Firmware Download Instructions for
EGX300
Currently Running Firmware Version
3.7xx
Updating to version 4.200 from version 3.7xx requires all data log files
to be converted internally.
This conversion will be executed at the first boot after the download.
While converting the data log files, browsing of the EGX will be
limited to a page displaying the status of the conversion until
conversion is complete.
Depending on the size and number of the data log files this process may
take several minutes.
Before downloading the firmware logging must be disabled.
It is recommended the user save all data log files to external
storage before downloading.
Refer to the EGX300 User's Guide for instructions on how to disable
logging and remove data log files.
1.
Disable Logging.
2.
Save data log files to external storage (optional but recommended).
3.
Remove data log files (optional but recommended).
4.
Transfer the version 4.200 firmware file (egx04200.bin) to your
computer.
5.
Use FTP to copy the "egx04200.bin" file from your computer to the
EGX300. The status LED will
flash rapidly while the firmware is being programmed.
Do not remove power during
this time. Once the
download is complete the EGX will automatically reboot.
Refer to the EGX300 User's Guide if you need more information.
6.
Allow the EGX to reboot after the firmware file transfer, then browse
the EGX300 Diagnostic Statistics page and confirm V4.200 is displayed as
the Firmware Version in the Gateway Information section.
7.
After confirming the firmware has been updated apply the V4.200 Disk
Update (patch).
|
