Downloads
|
Results 31 - 39 of 39
|
<<
<
2
3
4
>>
|
SEPAM - SFT2841 V11.2 Setting Software
The SFT2841 V11.2 software is the setting and operating tool for Sepam Series 20, Series 40 and Series 80 relays. It may be used in one of three operating modes.
- Offline mode - prior to commissioning and without connection to the Sepam relay to prepare protection and parameter settings
- Online mode - during commissioning, on a PC connected point-to-point to the Sepam front panel using the CCA783 serial cable: to load, upload and modify Sepam relay protection and parameter settings and to obtain all measurements and useful information during commissioning
- Network mode - during operation, on a PC connected to a set of Sepam relays via an E-LAN multipoint communication network in order to manage the protection system, to monitor the status of the electrical network and to run diagnostics on any incidents affecting the electrical network.
Minimum system requirements for SFT2841 are:
- Microsoft Windows 2000 / XP/ Vista
- Pentium 133 MHz (or more)
- 64 Mb RAM
- 200 MB of available disk drive
- CD-ROM drive
- 800x600, 65535 colors
INSTALLATION OF THE COMPLETE VERSION OF SFT2841
To install the complete version of SFT2841, the software serial number is required. Only SFT2841 software delivered with the connection cable (CCA783) is needed for connected mode operations. The software serial number can be found on a sticker on the CD-ROM box. It is possible to re-use a serial number for newer versions of SFT2841. Or you may use the serial number below:
Serial Number: 0647740-08
INSTALLATION OF THE DEMONSTRATION VERSION OF SFT2841
The installation of SFT2841 in demonstration version is always possible. (no serial number required). The SFT2841 demonstration software offers all the functions of the complete version, with the exception of the functions available in connected mode and the file saving function. Instructions: Download SFT2841 download and installation instructions.doc. Follow the instructions to download and install SFT2841.
- SEPAM SFT2841 V11.2 Setup - The SFT2841 V11.2 software is the setting and operating tool for Sepam Series 20, Series 40 and Series 80 relays
SMS - 2007 Daylight Saving Time
Schneider Electric has a solution for your PowerLogic ION or SMS system in regards to the new 2007 Daylight Saving Time change. To support these changes in PowerLogic SMS systems, we have created a document that outlines the impact of the DST change on meters and power monitoring software and describes procedures for updating to the new DST schedule in our products and in Microsoft Windows software.
- 2007 DST for AR - The Application Fact Sheet in PDF form below entitled "SMS DST 2007 Fact Sheet" contains the approved proceedure to install a software patch that will correct the date/time resolution on data logged after DST has taken effect.
SMS Data Execution Prevention (DEP)
- Data Execution Prevention - "Data Execution Prevention (DEP) is a new Microsoft technology designed to prevent malicious code from running on a computer system. It can be enforced by software and/or hardware. When DEP is enabled/installed, you may not be able to install this version of Advanced Reports. Software DEP is currently available on these Windows operating systems: XP Professional, SP2; Server 2003, SP1; Server 2003 R2 (subject to change as Microsoft releases new products). Hardware DEP is either enabled or disabled. To detect the DEP levels that are on your computer, you can download and run the WMIC Tool batch file, located below. When you run this batch file, it generates a list of hardware and software DEP settings for your computer. "
SMS Dual Microsoft Access Usage Notes
The file below contains instructions for installing and using multiple Microsoft Access versions on one computer. Follow the guidelines in the document for using multiple Microsoft Access version files.
SMS SQL 2000 SP3 Instructions
The files below contain instructions for installing SQL 2000 SP3 to an SMS Server. Download the file and and run to unzip the files the the c: empSMS_SP3(Slammer). Then follow the instructions in the document "Applying the Microsoft® SQL Server 2000 SP3 to SMS".
System Manager Software Service Packs
Select the SMS version to update from the list below. Please see the SMS v4 System Requirements Addendum document below concerning important information about the installation of SMS on non-server operating systems (such as Windows XP).
Tenant Metering Software
PowerLogic® Tenant Metering software is an entry-level application that provides an extremely cost effective method of automatically collecting meter data and generating tenant billing or account statements.
WPG WebPageGenerator
The WebPageGenerator is a unique tool that creates "custom" web pages for a specific power equipment lineup from very simple user input. With no knowledge of HTML or JavaScript, a user can create a complete web based interface for his power equipment.
- V3.6 WPG - The WebPageGenerator is a unique tool that creates "custom" web pages for a specific power equipment lineup from very simple user input. With no knowledge of HTML or JavaScript, a user can create a complete web based interface for his power equipment.
|
Results 31 - 39 of 39
|
<<
<
2
3
4
>>
|
