Downloads

Results 1 - 6 of 6

ECC21 Firmware

Click on the file tab to transfer the latest ECC21 firmware to your Computer. Note: Communication to serial devices through the ECC21 during firmware updates is not available. Communications should be restored automatically in most PowerLogic Systems. 


ECC21 HTML Pages and Instructions

The ECC21 enables you to access custom HTML pages (stored in the CM3000 or CM4000 series circuit monitors) using a standard web browser. The HTML pages let you access real-time device data from a single device or multiple devices, including the host circuit monitor. For more information, download "Using the ECC HTML Pages" instruction bulletin.

  • Using the ECC21 HTML Pages - "Using the ECC HTML Pages" contains the information you need to download and use the custom HTML pages created for use with the ECC21 for CM3000 and CM4000 series circuit monitors. The document is available as a PDF or Word document.
  • Custom ECC21 HTML Pages -

    The CM3000 and CM4000 series circuit monitors with the optional ethernet card (ECC21) provide access to information using a standard web browser. This download page contains a zip file with 12 custom web pages for the ECC21. The zip file also contains one executable program. This program installs a graphing tool to your web browser for use with some of the graphing and trending features of the custom web pages. To install the graphing tool, expand the contents of the zip file to your hard drive, double-click the executable file, and follow the install instructions provided. For instructions on loading custom web pages into the ECC21 card, please see the "Using the ECC21 HTML Pages" section of this web site or the ECC21 User's Guide.


EGX100 Firmware

  • EGX100 Firmware V2.900 - This version of firmware provides improved validation of the IP Address and the IP Address/Subnet Mask combination.


EGX300 Firmware

EGX300 Firmware & Disk Image Update

 

Version 4.000 firmware with Version 4.000 Disk Update support the following new features:

·          System Access Point

·          HTTPS Support

·          Exporting using SSL

·          Audit Trail

 

New Device Type Support:

 

EM1200, DM6300, EM6400,

EM6433, EM6436, EM6436Dual,

EM6438, PowerPact A, PowerPact E,

4-noks ZED-THL-M

 

Revised Device Type Support:

 

PM1000, PM700, PM800,

PM5350, PM800 A-S1 A-S2,

Compact NSX E, Compact NSX A

 

 

*Upgrading to version 4.000 requires new firmware to be downloaded to the EGX followed by the egx04000.upd ‘patch’ to the suite of files located on the EGX300 flash disk. 


ION Setup & Offline Meters


  • ION Setup V2.2 Build 825 - PowerLogic ION Setup software from Schneider Electric is a free, user friendly configuration tool.
  • Offline ION Setup - Off-line programming allows configuration and testing of meter template programming without a physical meter being present.


PM8ECC firmware & MIB



Results 1 - 6 of 6