The PowerLogic system can obtain and transform equipment data into useful information from compatible protective relays, trip units, circuit breakers, transformer temperature devices, panelboards, etc.
- Supports MODBUS and PowerLogic compatible devices
- Over 200 SMS device types available with pre-defined real time tables
- Provides tools to manage power system - barcharts, meters, alarms, automatic tasks and interactive graphics
- Retains historical usage of important operational parameters by collecting PC based data logging
- Allows trending, printing and sharing HTML-based reports
Network Interfaces:
Broadband
Fiber Optic
Ethernet
Radio Modem
Telephone Modem
Wireless Solutions
Other Manufacturers:
Johnson Controls
Andover
Landis and Gyr
Honeywell
Fischer
Rosemont
Allen Bradley
Modbus and Modbus Plus
GE 9070
Westinghouse INCOM
Siemens
Etc.
Square D Engineering Services are rigorously trained to perform thorough start-up practices when commissioning a PowerLogic system. We provide on-site installation assistance, verify metering connections and configure components and thoroughly test out the system so it is ready for your use. Once the commissioning is complete, we can also help your team with on-site training.
We will work with you to design or upgrade your existing system to best achieve your energy and power management objectives and informational needs. With expertise in electrical systems, protective relaying, communications, and automatic control systems, we can integrate, install and commission your system for optimal performance. As part of the planning process, we can examine your existing equipment, work directly with you to establish performance objectives, access system layout and information needs, and ensure that your power management system works to suit your operation.
Design services can include:
- System Design and Bill of Material Recommendations
- Specification development, drawings, documentation
- Enclosure panel design and build
- Automatic Control Systems/PLC Programming
- Third Party Device and communication interfaces
- Interactive Graphic Design to mimic facility layout, one-lines, equipment status
- Custom Software, Reports & Applications
Commisssioning
For example, if a system is commissioned with power system controls, below are some of the items that would be typical:
- Power all switchboards and verify proper interconnection wiring and control voltages.
- Set up all Powerlogic devices and communication modules. This will include all addressing and basic internal parameters used by the device.
- Install the PLCs and load programs.
- Install and configure the power monitoring workstation.
- Manually test each breaker locally, verifying the trip and close operation of each breaker.
- Manually test all motorized breakers from the mimic panel.
- Verify the communications from the power monitoring workstation, to meters, generators, UPS, other monitoring devices and remote I/O.
- Verify the proper data is displayed on the power monitoring computer screens. This includes breaker status, analog inputs, communications, and alarming.
- Manually test each breaker from the power monitoring workstation.
- If load shed system installed with automatic throw over system (ATO), then with generator equipment turned off and one supply open, verify interlocking scheme from the Mimic panel to insure that no two (2) sources can be paralleled.
- Perform all manual tests from the power monitoring computer. This includes any manual operation of start/stop commands to the generators, isolation of the UPS. Any load bank testing should be accomplished during this time.
- Simulate auto-transfer sequences
Square D Engineering Services can tailor graphical interface screens providing you access to information from across an enterprise. Using hyperlinked diagrams, you can start with a company-wide location map and drill down to details on a specific circuit.
When specific additional requirements are necessary to supplement existing product capabilities, we offer a range of custom engineered software solutions. Our custom software services offer software design, development, and integration such as:
- Monitoring piped utility pulses.
- OPC and database integration with other applications.
- Specialized reports such as system health, predictive usage correlations, load aggregation and statistical summary information.
- Custom web pages interface to show sequence of events with 1 ms accuracy for root-cause analysis for rapid response to resolving system issues
- Logic coding for PLC control blocks for integration into power system controls
- Real-time interactive graphics components to monitor health and status data for switchgear, circuit breakers, automatic transfer switches, generators and other facility equipment.
Typical diagrams include:
- Single line diagrams with meter and information to depict system wide status.
- Site plans with pictorial backgrounds
- Equipment status (ATS, switch position, generator, motors, etc.)
- Individual circuit status
- Water, Air, Gas, Steam flow or BTU information
We can also provide customized web pages and personalize with your company logo or color scheme. We are also proficient in deploying customized graphical interfaces using other SCADA packages that interface with the PowerLogic System, as well as, custom software services for OPC, database and web pages
|
